Latest hydraulic vice Tenders | Government hydraulic vice Tenders

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

CTN :45733076

06 Jul, 2026 NA

Sojitra - Gujarat

Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.

State Government

CTN :45634938

02 Jul, 2026 4.96 Lacs

Kangra - Himachal Pradesh

Tender For tender forfor repair, overhauling, testing & commissioning of hydraulic power pack system of butterfly valve at gaj power house, under khauli power house division, hpsebl, darini.

State Government

CTN :45384766

15 Jun, 2026 6.58 Lacs

Vidisha - Madhya Pradesh

Tender For pre-monsoon repair and maintenance of hydraulic power pack system and electrical control panel system and oiling greasing of 5 no. radial gates size 7.5 m x 5.5 m of bagharru medium project, district vidisha (m.p.)

Central Government/Public Sector

CTN :45262769

02 Jun, 2026 NA

Murshidabad - West Bengal

Tender For corrigendum : service contract for supervision replacement installation supply andcommisioning of 2 nos paddle feeder stage 1 hydraulic power pack andpipe line assosicated with the paddle feeder system at ntpc farakka under repair and maintenance

State Government

CTN :45353493

11 Jun, 2026 NA

Dapodi - Maharashtra

Tender For rate contract for supply of handpump set and spare parts - supply of handpump set and spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting rod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll), front cover, handle for deepwell hand pump (is: 15500 part 4), stand assembly telescopic for deepwell hand pump, ring spanner 17*18, crank spanner 17*18, i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete

CTN :44989822

25 May, 2026 10.00 Lacs

Raisen - Madhya Pradesh

Tender For hand pump repair material - hand pump complete set india mark 10 with connecting rod cylinder, hand pump head, hand pump water chamber, hand pump handle, hand pump rebar, hand pump axle, hand pump upper valve, hand pump lower, hand pump visor (all sizes) leather, leather, rubber, etc., hand pump cylinder heavy, hand pump rod socket, hand pump chain heavy, gi pipe 1 (1/4), gi socket 1 (1/4), bearing 6204, nut-bolt plated, lifting chain pulley block up to 3 tons capacity, lifting small 3-gauge loads up to 10 feet long, pedestal assembly, hold tight, saw blade, vice hydraulic vice manual, screwdriver set, fixed wrench set sizes up to 30 x 32, ring wrench set sizes up to 30 x 32, pliers, chain wrench, pipe range wrench 18 inches, die set up to 2 inches with hand, wheel wrench, cylinder c.i. cap, cylinder c.i. nut, axial nut, chain nut, sealing ring, front cover gi, guide visor, liner brass, master rod 1.5 ft, lower guide, upper guy, bearing nbc 6309, rubber sheet 6 mm, rubber sheet 12 mm, rubber sheet 16 mm, lojay spyder rubber, nuts and bolts

CTN :45149144

22 May, 2026 NA

Agra - Uttar Pradesh

Tender For providing of repair and overhauling service - calibration of hydraulic power pack; calibration of hydraulic power pack; yes; buyer premises

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

State Government

CTN :43172451

29 Apr, 2026 NA

Ukai - Gujarat

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 5079g work of erection and commissioning of new bucket wheel assembly hydraulic power pack assembly bucket wheel gear box internals installed in stacker cum reclaimer..

Hydraulic Vice Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

State Government